Roadster Cage Kit- Early Bronco Roll Bar Cage Kit FREE SHIPPING

Complete 6 Point Roadster Cage

(Hoops are split 2 piece with sleeve for UPS shipping)

Constructed from 1/8" THICK STEEL TUBING, 2" O.D.,

Connecting bars Pre-Notched on One End, Hoops and connecting bars require trimming and welding

NOTE: Hardtop Applications should ask for non bent upper connector bars to avoid possible interference , Clears E-Brake and Wipers (see below),
Glove box will approx 1/2 way, factory electric wipers will require
the front hoop be angled or backed off to clear and will not
be parallel to windshield as shown in some photos.
NOTE:
Hoops are longer than required and will require cutting!!!!!
Connectors tubes are notched on one end and will require
notching the opposite end.

To Upgrade to DOM (High Strength Drawn Over Mandrel) Tube and ADD CUSTOM ITEMS such as Additional bars, Gussets, Seat Mounts ect.
Click on the option boxes below this description.

Material: 2" O.D. x 1/8" thick Mild Steel H.R.E.W. (Hot Rolled Electric Welded) Tubing. We use a Mandrel Bender with a 6.5" Centerline Bend Radius

Welding and Trimming is Required, All tubes and hoops ship longer lengths than needed for
customization.

Fits Steel Body and most fiberglass bodys