Steering Parts, Tie Rod & Drag Link Kits, Tie Rods, Reamers, 7/8-18 Taps, Nuts & Adapters, D.O.M. Tubing
Extreme Custom Parts & Fabrication» Extreme Custom Fabrication
Browse Steering Parts, Tie Rod & Drag Link Kits, Tie Rods, Reamers, 7/8-18 Taps, Nuts & Adapters, D.O.M. Tubing Products
Items 1-53 of 53
Tie Rod Over / Repair Bushing Dana 44 Dana 60 7 Degree 2234 2233New
BRAND NEW QUALITY MADE TIE ROD BUSHING 7 DEGREE MADE IN U.S.A., THIS IS THE CORRECT BUSHING TIE ROD OVER CONVERSIONS OR REPAIRING A WORN KNUCKLE, Reamer is required to install , will also fix knuck...
CUSTOM TIE ROD / DRAG LINK KIT DANA 44 60 Bronco Jeep 4X4 1 1/2" D.O.M. (Make to your Specs) FREE SHIPPINGNew
FREE SHIPPING to U.S.A. (not Hawaii or Alaska sorry)
Make your own Super Duty Tie Rod and Drag Link Kit!!!!
(1) 35" LENGTH OF 1 1/2" O.D. x 1/4" WALL D.O.M. TUBING
(1) 47" LENGTH OF 1 1/...
TIE ROD / DRAG LINK DANA 44 - FORD 76-79 F150 - 78-79 BRONCO 1 1/2" D.O.M.New
Fully Assembled
Fits stock 76-79 F150 and 78-79 Bronco (55.5" Tie Rod Centers) with stock disc brake knuckles, made from UNBREAKABLE 1 1/2" O.D. D.O.M. Tubing,
Reaming of pitman arm & pass....
11/16-18 LH Welded Tie Rod Adapter Dana 44 60 High Steer Weld In FREE shippingNew
11/16-18 LEFT HAND THREADED TIE ROD ADAPTER
ROD END SLIPS IN 1" I.D. TUBING AND REQUIRES WELDING 1 1/2" O.D.
Tapped Through, tie rod will not bottom out
11/16-18 RH Welded Tie Rod Adapter Dana 44 60 High Steer Weld In FREE shippingNew
11/16-18 RIGHT HAND THREADED TIE ROD ADAPTER
ROD END SLIPS IN 1" I.D. TUBING AND REQUIRES WELDING 1 1/2" O.D.
Tapped Through, tie rod will not bottom out
3/4-16 RH Welded Tie Rod Adapter Dana 44 60 High Steer Weld In FREE shippingNew
3/4/16 RIGHT HAND THREADED TIE ROD ADAPTER
ROD END SLIPS IN 1" I.D. TUBING AND REQUIRES WELDING 1 1/2" O.D.
Tapped Through, tie rod will not bottom out
7/8-18 RH Welded Tie Rod Adapter Dana 44 60 High Steer Weld In FREE SHIPPINGNew
7/8-18 RIGHT HAND THREADED TIE ROD ADAPTER
ROD END SLIPS IN 1" I.D. TUBING AND REQUIRES WELDING 1 1/2" O.D.
Tapped Through, tie rod will not bottom out
CUSTOM HEIM JOINT TIE ROD / DRAG LINK KIT DANA 44 60 Bronco Jeep 4X4 1 1/2" D.O.M. (Make to your Specs) FREE SHIPPINGNew
FREE SHIPPING to U.S.A. (not Hawaii or Alaska sorry)
Make your own Super Duty Heim Joint Tie Rod and Drag Link Kit!!!!
(1) 42" LENGTH OF 1 1/2" O.D. x 1/4" WALL D.O.M. TUBING
(1) 54" LEN...
CUSTOM TIE ROD / DRAG LINK DANA 44 60 Bronco Jeep 4X4 1 1/2" D.O.M. (Made to your Specs)New
Fully Assembled "Y" set up
MEASUREMENTS REQUIRED :
-DRIVER SIDE STEERING KNUCKLE TIE ROD HOLE CENTER TO PASSENGER SIDE STEERING KNUCKLE TIE ROD HOLE CENTER. ( VEHICLE STEERING STRAIGHT AHEAD...
CUSTOM TIE ROD / DRAG LINK KIT DANA 44 60 High Steer 1 1/2" D.O.M. (Make to your Specs) FREE SHIPPINGNew
FREE SHIPPING to U.S.A. (not Hawaii or Alaska sorry)
Make your own Super Duty Tie Rod and Drag Link Kit!!!!
(1) 35" LENGTH OF 1 1/2" O.D. x 1/4" WALL D.O.M. TUBING
(1) 47" LENGTH OF 1 1/...
TIE ROD / DRAG LINK DANA 30 1955-1982 Jeep CJ 5 1 1/2" D.O.M. New
Fully Assembled - using 1 ton tie rod ends
Fits stock 1955-1982 CJ5 Dana 30 or Dana 44 FRONT DIFF with stock drum brake knuckles and Drum Brakes
made from UNBREAKABLE 1 1/2" O.D. D.O.M. Tubin...
TIE ROD / DRAG LINK DANA 30 JEEP CJ5 CJ7 CJ6 CJ8 72-81 1 1/2" D.O.M. Unbreakable - 330726897483New
Fully Assembled -
Fits stock 1972-1981 CJ5, 1972-1976 CJ6, 1976-1981 CJ7, 1981 CJ8 Dana 30 FRONT DIFF 39.5" Long Tie Rod
made from UNBREAKABLE 1 1/2" O.D. D.O.M. Tubing,
Some customers have...
TIE ROD / DRAG LINK DANA 30 JEEP CJ7 CJ8 1 1/2" D.O.M. Unbreakable - Wide TrackNew
Fully Assembled -
Fits stock 1982-1986 CJ7, CJ8 Dana 30 FRONT DIFF 42.5" Long Tie Rod
made from UNBREAKABLE 1 1/2" O.D. D.O.M. Tubing,
Some customers have reported interference with leaf sp...
TIE ROD / DRAG LINK DANA 30 YJ TJ XJ MJ JEEP 1 1/2" D.O.M. WRANGLER CHEROKEE COMMANCHENew
Fully Assembled
Fits stock YJ TJ XJ with stock disc brake knuckles, made from UNBREAKABLE 1 1/2" O.D. D.O.M. Tubing and 1 ton tie rod and drag link ends,
Reaming of Knuckles, pitman arm & pas...
TIE ROD / DRAG LINK DANA 44 - FORD 1966-1975 F100 - 1 1/2" D.O.M.New
Fully Assembled
Fits stock 66-72 F100 NON P.S. (54.5" Tie Rod Centers) with stock knuckles, made from UNBREAKABLE 1 1/2" O.D. D.O.M. Tubing,
Reaming of knuckles, pitman arm & supplied passen...
TIE ROD / DRAG LINK DANA 44 -1966-1975 Bronco 1 1/2" D.O.M. Dana 30New
Fully Assembled
Fits stock 1966-1975 Bronco Dana 30 or Dana 44 with stock drum brake knuckles and Drum Brakes, also works with the common GM Disc Brake conversion which is commonly adapted to th...
TIE ROD / DRAG LINK DANA 44 -1966-1975 Bronco 1 1/2" D.O.M. Dana 30 No Knuckle reamingNew
Fully Assembled
Fits stock 1966-1975 Bronco Dana 30 or Dana 44 with stock drum brake knuckles and Drum Brakes and DOES NOT require reaming of Knuckles!!!!!, also works with the common GM Disc Br...
TIE ROD / DRAG LINK DANA 44 -1976-1977 Bronco 1 1/2" D.O.M.New
Fits stock 1976-1977 Bronco Dana 44 with stock Disc brake knuckles, made from UNBREAKABLE 1 1/2" O.D. D.O.M. Tubing,
Will not fit "Big Bronco" 1977 1/2 - 1979 or F150
Reaming of pitman arm...
TIE ROD / DRAG LINK DANA 44 -1976-1977 Bronco 1 1/2" D.O.M. No Knuckle reamingNew
Fits stock 1976-1977 Bronco Dana 44 with stock Disc brake knuckles and DOES NOT require reaming of Knuckles!!!!!, made from UNBREAKABLE 1 1/2" O.D. D.O.M. Tubing,
Will not fit "Big Bronco" 197...
Tie Rod Over / Repair Bushing Dana 44 Dana 60 7 Degree 2234 2233New
BRAND NEW QUALITY MADE TIE ROD BUSHING 7 DEGREE MADE IN U.S.A., THIS IS THE CORRECT BUSHING TIE ROD OVER CONVERSIONS OR REPAIRING A WORN KNUCKLE, Reamer is required to install , will also fix knuck...
Tie Rod Reamer 8 Degree U.S.A. Ball Joint Reamer FREE SHIPPINGNew
BRAND NEW QUALITY MADE TIE ROD REAMER 8 DEGREE MADE IN U.S.A., THIS IS THE CORRECT REAMER FOR REAMING KNUCKLES WITH GM 1 TON TIE ROD ENDS
Taper Specs: 1 1/2" /ft (7.15 Degrees)
Overall Length...
Tie Rod Tubing 1 1/2" O.D. x .25" Thick D.O.M. x 3 foot longNew
1 1/2" X 1/4" Wall Thickness D.O.M. Tubing 3 Foot Long section, long enough for most any drag link applacation. This is the correct inner diameter for a our 7/8"-18 Welded pre threaded adapters. NO...
Tie Rod Tubing 1 1/2" O.D. x .25" Thick D.O.M. x 4 foot longNew
1 1/2" X 1/4" Wall Thickness D.O.M. Tubing 4 Foot Long section, long enough for most any tie rod applacation. This is the correct inner diameter for a our 7/8"-18 Welded pre threaded adapters. NO M...
Tie Rod Tubing 1 1/2" O.D. x .25" Thick D.O.M. x 5 foot longNew
1 1/2" X 1/4" Wall Thickness D.O.M. Tubing 5 Foot Long section, long enough for most any tie rod applacation. This is the correct inner diameter for a our 7/8"-18 Welded pre threaded adapters. NO M...
Tie Rod Tubing 1 1/2" O.D. x .343" Thick D.O.M. x 3 foot long .344 , 7/8-18New
1 1/2" X .343" Wall Thickness D.O.M. Tubing 3 Foot Long section, long enough for most any drag link applacation. This is the correct inner diameter (tap drill diameter) for a 7/8"-18 thread using o...
Tie Rod Tubing 1 1/2" O.D. x .343" Thick D.O.M. x 4 foot long .344 , 7/8-18New
1 1/2" X .343" Wall Thickness D.O.M. Tubing 4 Foot Long section, long enough for most any tie rod applacation. This is the correct inner diameter (tap drill diameter) for a 7/8"-18 thread using our...
Tie Rod Tubing 1 1/2" O.D. x .343" Thick D.O.M. x 5 foot 6 inch longNew
1 1/2" X .343" Wall Thickness D.O.M. Tubing 5'6" Foot Long section, long enough for most any tie rod applacation. This is the correct inner diameter (tap drill diameter) for a 7/8"-18 thread using ...
Tie Rod Tubing 1 1/2" O.D. x .343" Thick D.O.M. x 5 foot long .344 , 7/8-18New
1 1/2" X .343" Wall Thickness D.O.M. Tubing 5 Foot Long section, long enough for most any tie rod applacation. This is the correct inner diameter (tap drill diameter) for a 7/8"-18 thread using our...
Tie Rod Tubing 1 1/4" O.D. x .219" Thick D.O.M. x 3 foot longNew
1 1/2" X .219" Wall Thickness D.O.M. Tubing 3 Foot Long section, long enough for most any drag link applacation. This is the correct inner diameter (tap drill diameter) for a 7/8"-18 thread using o...
Tie Rod Tubing 1 1/4" O.D. x .219" Thick D.O.M. x 4 foot longNew
1 1/2" X .219" Wall Thickness D.O.M. Tubing 4 Foot Long section, long enough for most any drag link applacation. This is the correct inner diameter (tap drill diameter) for a 7/8"-18 thread using o...
